Skip to content
PropertyRoofs

Polyurethane roof coating

Polyurethane roof coating, usually called urethane, is a tough elastomeric coating applied as an aromatic base coat under an aliphatic top coat that stands up to sunlight. It is a standard coating for spray foam roofs and also goes over existing metal, single-ply and asphalt roofs. Makers pitch it for roofs with foot traffic and hail; the trade-offs are solvent fumes while it goes on and tighter timing between coats.

ASTM standard
D6947, written for coatings over spray foam
Coats
Aromatic base coat, aliphatic top coat
How it cures
Most react with air moisture; some are two-part
VOC
1 to 233 g/L, by product
Ponding water
Some makers say it resists ponding; Gaco's warranty excludes it
Warranty available
10 to 20 years by thickness

What polyurethane roof coating is

Polyurethane is made by reacting an isocyanate with a polyol blend, and roof urethanes vary widely in properties, application and cure time. Most are single-component coatings that cure by reacting with moisture in the air. Two-component urethanes are mixed on site: Gaco's U66 has a pot life of about an hour at 78°F, and Tremco's AlphaGuard BIO 20 to 25 minutes.

A urethane roof usually gets two kinds of urethane. The federal spec for spray foam roofing says aromatic urethane darkens and chalks in sunlight, while aliphatic urethane keeps its color and gloss and is used only as the finish coat over aromatic base coats. Makers say the same of their own products: Neogard's aromatic base coat is not UV resistant and not meant as a top coat, and Gaco's U91 is not a finish coat.

The two coats are made in contrasting colors so the crew can see where the top coat has covered, such as Gaco's light tan U91 under its white U92. Aromatic urethane is also used as a base coat under silicone: Gaco and American WeatherStar both list silicone top coats over their aromatic base coats.

ASTM D6947 is the standard for single-component, moisture-cured urethane coatings on spray foam roofs, and it gives no application guidance. The 2021 International Building Code names it for urethane coatings on spray foam and again in its table of roof coating standards.

Conventional urethanes are solvent-borne: Gaco's P300 contains mineral spirits and lists 233 g/L of VOC for its aromatic base coat and 80 g/L for its aliphatic finish, and Sika's Sikalastic-626 lists 209 g/L. Low-VOC versions are sold for stricter air districts: Neogard's SCAQMD-compliant base coat lists 47 g/L, Sika's Sikalastic-646 38 g/L, and Tremco's bio-based AlphaGuard BIO 1 g/L at 100% solids.

Pros and cons

Where polyurethane coatings work

  • Tough: the federal spray foam spec rates aliphatic urethane excellent for abrasion, tensile strength and impact resistance.
  • Makers aim it at roofs with foot traffic and hail risk.
  • White aliphatic top coats hold reflectance well in Cool Roof Rating Council ratings: Neogard's 7490-CA keeps 0.76 after three years outdoors.
  • The federal spec rates it as withstanding moderate ponding water.
  • It takes other top coats: aromatic base coats can go under silicone as well as aliphatic urethane.

Where they fall short

  • Solvent-borne versions are flammable while wet and give off fumes; air intakes have to be shut off and sealed while it goes on.
  • It contains isocyanates, and Gaco's data sheets warn of severe dermatitis and bronchial spasms.
  • It needs at least two coats on a schedule; miss the recoat window and the surface has to be cleaned and primed.
  • Aromatic base coats darken and chalk in sunlight, so they always need a top coat.
  • It doesn't go over silicone, and over asphalt it needs a primer.
  • Gaco's sample warranty excludes ponding damage for its urethane coatings.

How it's applied

  1. Test adhesion on an existing roof. Gaco strongly recommends adhesion tests before bidding, and Sika requires compatibility and adhesion testing over existing coatings or membranes.
  2. Prime the roof. Gaco requires a primer under its P300 on single-ply and asphalt roofs, Neogard uses an epoxy primer over built-up and modified bitumen roofs, and Tremco grinds metal to clean bright metal and primes it.
  3. Shut off and seal air intakes, and protect cars, windows and walls from overspray. Gaco's specs call for overspray warning signs within 400 feet.
  4. Apply the aromatic base coat, then the aliphatic top coat. Over new spray foam the base coat goes on the same day, at least 2 hours after the foam; the 2021 IBC allows 2 to 72 hours, and the federal spec says never to leave foam uncoated overnight.
  5. Stay inside each coat's recoat window: 72 hours for Tremco's AlphaGuard BIO, 48 hours for American WeatherStar's 510-CA and 7 days for Sika's Sikalastic-626. After that, the surface has to be cleaned and primed.
  6. Keep traffic off while it cures: at least three days in Gaco's specs and 48 hours at 75°F and 50% humidity in Neogard's.

Weather and cure

Application windows run from about 40°F to 100°F or more: 40 to 120°F substrate temperature for Gaco's P300, above 40°F and below 100°F for Neogard's 7490-CA, 41 to 95°F air temperature for Sika's Sikalastic-626 and 45 to 110°F for Tremco's AlphaGuard BIO. Neogard, Sika and Tremco all require the surface to be at least 5°F above the dew point.

Moisture-cure urethanes cure faster in warm, humid weather and slower in cold, dry weather. Gaco lists 15 hours to cure at 75°F and 50% humidity for its P300 and says not to apply it when rain or heavy dew is expected within 4 hours. Sika says its Sikalastic-626 resists rain 10 minutes after it goes on.

Ponding water

The federal spray foam roofing spec rates both aromatic and aliphatic urethane as withstanding moderate ponding water. Makers go further: Neogard says its urethanes can perform under ponding water when the required dry thickness is reached, and Sika lists its Sikalastic-626 as resistant to ponding water.

The same data sheets rule out constant immersion: Neogard's 7490-CA, Sika's Sikalastic-626 and Tremco's AlphaGuard BIO all say so.

Gaco's brochure says its U9 system withstands ponding water, but its sample coating warranty excludes leaks caused by ponding water for every Gaco coating except silicone. Its P300 restoration specs over asphalt and metal roofs say they are not intended for slopes under 2:12 or surfaces prone to ponding.

On spray foam roofs, the 2021 IBC requires a design slope of at least 1/4 inch per foot for drainage.

Foot traffic, impact and hail

Toughness is the reason to choose urethane. The federal spray foam roofing spec rates aliphatic urethane excellent for abrasion resistance, tensile strength, elasticity and impact resistance, and sets minimums for urethane coatings of 1,000 psi tensile strength and 150 pounds per inch of tear resistance.

Makers' data sheets for aliphatic top coats list tear resistance of 223 lb/in for Gaco's U92, 238 for Sika's Sikalastic-626 and 281 for Gaco's P300 finish coat. Compare like with like: tensile figures depend on the test method, and Gaco's U91 data sheet lists 2,600 psi under ASTM D412 and 435 psi under ASTM D2370.

Makers aim urethane at roofs that see traffic and impacts: Gaco calls its U92 ideal for frequently trafficked and impact-prone roofs, Neogard lists high impact resistance to hail and foot traffic for its metal-roof system, and Sika lists roof walkways among the uses for its Sikalastic-626.

Granules aren't required on urethane, but the federal spec says they improve resistance to foot traffic and dropped tools, and Sika requires an extra wear coat with slip-resistant aggregate where foot traffic is heavy.

Hail ratings for spray foam roofs generally come from FM 4470, which rates systems for moderate or severe hail. Neogard says its 20-year, 60-mil urethane system over foam meets the FM 4473 Class 4 hail impact classification, while its coating is FM Approved only as a maintenance coating under FM 4470.

Odor and safety

Solvent-borne urethanes give off fumes and are flammable while wet. Gaco, Neogard, Sika and the federal spec all call for air intakes to be shut off or sealed during application. Closed-cup flash points on data sheets include 100°F for Gaco's P300 and 80°F for American WeatherStar's aromatic 508.

Urethanes contain isocyanates. Gaco's P300 data sheets warn that the coating can cause severe dermatitis and bronchial spasms, and to avoid breathing vapors and spray mist.

For occupied buildings, Tremco markets its AlphaGuard BIO as virtually odorless for schools and hospitals, and Sika sells a low-odor Sikalastic-646, though its data sheet still calls for sealing air intakes.

Warranties and thickness

Labor-and-material warranties need an approved applicator. Gaco requires a Gaco licensed applicator with a current letter of good standing, and Neogard sells material-only warranties to anyone but labor-and-material warranties only through its certified applicators.

Thickness is checked. Gaco says jobs that miss the minimum dry thickness aren't eligible for its labor-and-material warranty, its specs let the owner's representative take core samples, and Neogard says a third party or its own representative may inspect the work.

Gaco's sample coating warranty has no dollar limit on repairing a covered leak, asks the owner to report a leak within 30 days, and doesn't cover fading, dirt or discoloration.

Required thickness is set by each maker and project, and over spray foam the total is generally 20 to 40 dry mils. Makers' specs step it up with the warranty term:

  • Gaco U91 and U92 over spray foam: 30, 36 and 42 dry mils for 10-, 15- and 20-year labor-and-material warranties.
  • Gaco P300 over spray foam: 28 dry mils for 10 years and 34 for 15; over aged metal, 23 and 29.
  • Neogard over spray foam: an average of 36, 48 and 60 dry mils for 10, 15 and 20 years, the 20-year system being its very severe hail system.
  • Neogard over metal: an average of 18 dry mils for 10 years and 24 for 15.
  • The federal spray foam spec: a 30-mil urethane coating schedule and a 10-year no-dollar-limit warranty unless the government directs otherwise.

Reflectance

The top coat sets the reflectance; Gaco's aromatic U91 needs a top coat for UV resistance and high reflectance. White aliphatic top coats rated by the Cool Roof Rating Council include Gaco's U9200 at 0.85 solar reflectance new and 0.73 after three years outdoors, Neogard's 7490-CA at 0.88 and 0.76, and Tremco's AlphaGrade top coat at 0.83 and 0.67.

The federal spec adds two cautions: poorly designed cool roofs in ASHRAE climate zones 4 and higher have led to condensation below the membrane, and above about R-24 of insulation a cool surface has little effect on the building's energy use.

Fire ratings and approvals

Fire ratings belong to the tested assembly: results under ASTM E108 and UL 790 state the maximum slope, the thickness of each layer and whether the deck is combustible. UL's listing for Gaco shows Class A for its foam with a U91 base coat and U92 top coat on a noncombustible deck up to 1/2 in 12, and Neogard's guide spec rates its urethane system over foam Class A.

Over existing roofs, approvals treat urethane as a maintenance coating. Miami-Dade approves Gaco's P300 system as a roof maintenance coating that may not be used as a roof system in the high-velocity hurricane zone, and Neogard's coating is FM Approved only as a maintenance coating, not a liquid-applied roof cover.

Other coatings

Roof systems

Calculator

Back to all roof coatings

Sources

  1. USACE / NAVFAC / AFCEC, via the Whole Building Design Guide, UFGS 07 57 13 Sprayed Polyurethane Foam (SPF) Roofing (August 2025)
  2. Neogard (a part of Hempel), Permathane Aliphatic II System Foam Roof Coating (system web page with FAQ)
  3. Gaco (Amrize Building Envelope), Product Data Sheet: GacoFlex Polyurethane 300 Aliphatic Finish Coat, Single-Component Moisture-Cure Polyurethane Coating (rev. 08/2026)
  4. Insurance Institute for Business & Home Safety (section by the Spray Polyurethane Foam Alliance), RICOWI Roof Guide: Spray Foam
  5. Neogard (a part of Hempel), Product Data Sheet 7490-CA (47YJB) Aliphatic Urethane Roof Coating, SCAQMD-Compliant (issued September 2021)
  6. Gaco (Amrize Building Envelope), Urethane Roof Coatings for Repair, Maintenance & More (web page)
  7. Gaco (Amrize Building Envelope), U92 Aliphatic Urethane (product web page)
  8. Neogard (a part of Hempel), Elasta-Gard M Aliphatic, metal roof urethane coating system (web page with FAQ)
  9. Gaco (Amrize Building Envelope), Application Specification SPF-P300-34-15: GacoFlex P300 Series Polyurethane Roof Coating over Seamless Sprayed-in-Place Polyurethane Foam Roofing (rev. 04/2026)
  10. Tremco Roofing and Building Maintenance, AlphaGuard BIO Top Coat data sheet
  11. ASTM International, ASTM D6947/D6947M-16(2023), Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
  12. Neogard (a part of Hempel), Product Data Sheet 70620-CA (474JB) Aromatic Roofing Urethane, SCAQMD-Compliant (issued September 2021)
  13. Gaco (Amrize Building Envelope), Product Data Sheet: GacoFlex U91 Series Single-Component Moisture-Cure Polyurethane Coating (rev. 05/2026)
  14. Gaco (Amrize Building Envelope), Product Data Sheet: GacoFlex U66 Two-Component, Fire-Retardant Polyurethane Coating (rev. 04/2024)
  15. Tremco Roofing and Building Maintenance, AlphaGuard BIO Base Coat data sheet
  16. Gaco (Amrize Building Envelope), Product Data Sheet: GacoFlex Polyurethane 300 Aromatic Base Coat, Single-Component Moisture-Cure Polyurethane Coating (rev. 08/2026)
  17. Sika Corporation, Product Data Sheet: Sikalastic-626 Polyurethane Roof Coating (April 2023)
  18. Gaco (Amrize Building Envelope), GacoFlex Roof Coating Limited Warranty, with General Terms, Conditions and Limitations (sample, 2025)
  19. Gaco (Amrize Building Envelope), Application Specification SPF-U91U92-30-10: GacoFlex U91 & U92 over Seamless Sprayed-in-Place Polyurethane Foam Roofing (rev. 11/2025)
  20. Gaco (Amrize Building Envelope), Application Specification SPF-U91U92-42-20: GacoFlex U91 & U92 over Seamless Sprayed-in-Place Polyurethane Foam Roofing (rev. 06/2026)
  21. Gaco (Amrize Building Envelope), U9 Series Urethane Roof System brochure (MKGF1028, 07/2025)
  22. American WeatherStar, Product Data Sheet: Aromatic Urethane 508 (PDS-050626)
  23. International Code Council, 2021 International Building Code, Chapter 15: Roof Assemblies and Rooftop Structures
  24. Sika Corporation, Product Data Sheet: Sikalastic-646 Lo-VOC Polyurethane Roof Coating (November 2025)
  25. Cool Roof Rating Council, Rated Products Directory, roof products (downloaded October 18, 2026)
  26. Gaco (Amrize Building Envelope), Product Data Sheet: GacoFlex U92 Series Single-Component Moisture Cure Aliphatic Topcoat (rev. 08/2026)
  27. Gaco (Amrize Building Envelope), Application Specification ASP-P300-34-15: GacoFlex P300 Series Polyurethane Roof Coating for Restoring Modified Bitumen and Smooth Built-Up Roofing Systems (rev. 04/2026)
  28. Neogard (a part of Hempel), Guide Specification: Elasta-Gard BUR/MB Aliphatic, Section 07 56 00 Fluid-Applied Roofing (issued July 2021)
  29. Neogard (a part of Hempel), Guide Specification: Permathane Aliphatic II, Section 07 56 13 Sprayed Polyurethane Foam Roofing (issued July 2021)
  30. American WeatherStar, Product Data Sheet: Aliphatic Urethane 510-CA (PDS-032825)
  31. Gaco (Amrize Building Envelope), Application Specification MR-P300-29-15: GacoFlex Polyurethane 300 Roof Coating for Restoring Aged Metal Roofing Systems (rev. 04/2026)
  32. Gaco (Amrize Building Envelope), Application Specification SPF-U91U92-36-15: GacoFlex U91 & U92 over Seamless Sprayed-in-Place Polyurethane Foam Roofing (rev. 11/2025)
  33. Gaco (Amrize Building Envelope), Application Specification SPF-P300-28-10: GacoFlex Polyurethane 300 System over Spray Polyurethane Foam (rev. 04/2026)
  34. Gaco (Amrize Building Envelope), Application Specification MR-P300-23-10: GacoFlex Polyurethane 300 Roof Coating for Restoring Aged Metal Roofing Systems (rev. 04/2026)
  35. Neogard (a part of Hempel), Guide Specification: Elasta-Gard M Aliphatic (issued July 2021)
  36. UL Solutions (listing posted by Gaco), Product iQ listing TGFU.R5663, Roofing Systems (Holcim Solutions and Products US)
  37. Miami-Dade County, Product Control Section, Notice of Acceptance 25-0926.09: GacoFlex / ERSystems Polyurethane 300 System (approved October 23, 2025)

Updated October 2026.